THIS PRODUCT IS COMPATIBLE WITH ALL MODELS OF THE SCORPION EVO 3 AND 3+
When designing the Enhanced Bolt, we tackled the biggest issue with the OEM bolt: soft material causing excessive wear on the bottom of the bolt. Due to the soft material, a burr will eventually peen over the striker block hole keeping the striker block depressed, increasing the risk of out of battery detonation (OOBD). Our manufacturing and engineering team tackled this issue by producing our Enhanced Bolt from D2 Tool Steel, and heat treating to a minimum of 58 HRC (OEM is 43 HRC). During manufacturing, we chamfer and add radiuses to multiple edges to prevent excessive wear on the hammer and bolt during hammer reset. Using this material, manufacturing processes, and rockwell provides not only superior wear resistance than other bolts for the CZ Scorpion, but also provides far superior impact resistance. We then use a Nickel Boron coating on each Enhanced Bolt to provide additional durability, this Nickel Boron coating adds an approximate 70 HRC to the surface of the bolt. In additional to increasing the hardness of the bolt, the Nickel Boron coating is also extremely lubricious, requiring almost zero maintenance and makes the bolt easy to clean. We hold each and every bolt to extremely tight tolerances to provide the best quality product for our customers.
Our Enhanced Parts Kit comes installed into your bolt and has all the necessary components to complete your bolt - including our new Enhanced Recoil Assembly, which reduces felt recoil by slowing the bolt down with an additional dampening spring.
Products included:
- Enhanced Striker Block
- Striker Block Spring
- Enhanced Recoil Assembly
- Ascalon 125% Spring
- Firing Pin
- Firing Pin Spring
- Extractor
- Extractor Spring
- Extractor Retaining Pin
- Cross Retaining Pin
- Recoil Bushing
All parts are coated in the same Nickel Boron coating as the Enhanced Bolt - providing exceptional wear and impact resistance to maintain the longevity of your components.
DISCLAIMER: “CZ”, “CZ Scorpion Evo 3”, are federally registered trademarks of CZ-USA. and is one of many trademarks owned by CZ-USA. Neither Nexus FA LLC nor this site are affiliated in any manner with, or otherwise endorsed by, CZ-USA. The use of “CZ” on this page is merely to advertise the sale of CZ compatible products, parts, or components. For additional genuine CZ-USA products and parts visit www.cz-usa.com
