Enhanced Bolt for CZ Scorpion (Bolt Only)

When designing the Enhanced Bolt, we tackled the biggest issue with the OEM bolt: soft material causing excessive wear on the bottom of the bolt. Due to the soft material, a burr will eventually peen over the striker block hole keeping the striker block depressed, increasing the risk of out of battery detonation (OOBD). Our manufacturing and engineering team tackled this issue by producing our Enhanced Bolt from D2 Tool Steel, and heat treating to a minimum of 58 HRC (OEM is 43 HRC). During manufacturing, we chamfer and add radiuses to multiple edges to prevent excessive wear on the hammer and bolt during hammer reset. Using this material, manufacturing processes, and rockwell provides not only superior wear resistance than other bolts for the CZ Scorpion, but also provides far superior impact resistance. We then use a Nickel Boron coating on each Enhanced Bolt to provide additional durability, this Nickel Boron coating adds an approximate 70 HRC to the surface of the bolt. In additional to increasing the hardness of the bolt, the Nickel Boron coating is also extremely lubricious, requiring almost zero maintenance and makes the bolt easy to clean. We hold each and every bolt to extremely tight tolerances to provide the best quality product for our customers.